PortStone Stone and Brick Patterns
PortStone can be made in 12 different
patterns plus 4 border patterns. Any PortStone color and be made in any PortStone pattern. This gives
more than 150 possible color/pattern combinations to choose form.
You choose your pattern, you choose your color and PortStone will make YOUR floor especially for
you.
With PortStone, the pattern is already established!
All PortStone products are made with the pattern already laid out in
sheets of brick or stone. Depending on the brick pattern or stone pattern chosen, each sheet will contain
from 3 to more than 16 bricks or stones, already laid out, positioned, spaced and sized, in what ever pattern
you choose. Most brick patterns are "keyed" so that they will only fit together one way which makes it very
easy to align when being installed. For example, if installed regular brick pavers, the Herringbone pattern
can be very difficult to keep straight. Because regular brick flooring is laid one-brick-at-the-time, great
care must be taken to properly space and position each brick. But with PortStone, our Herringbone pattern
comes in sheets of 16 brick per sheet with each sheet covering 3.75 square feet, and each sheet is keyed top and
bottom and on each side so that it only fits together one way. We do suggest that you pop some chalk lines on
the floor just to help keep the overall floor straight, but that should be done regardless of what kind of
brick or tile is being laid.
Use PortStone's border stone or brick patterns to really accent your
floor or patio. Our Soldier Course brick border pattern comes in 3' strips for easy fast
installation. We even make mitered corner pieces to dress up each corner with just the finishing
touch to accent any border application. A nice look can be achieved by insetting the border 8" to
16" from the edge of the room or patio. Then use the same brick or stone that is used in the rest of the
area to fill in around the edges between the wall and the border.
|

|

|
|
RUNNINGBOND
Available in 2 sizes, Large Runningbond Brick measure approx. 4 1/4" X 8 3/4".
The bricks in Small Runningbond measure approx. 3 1/2" X 7 1/2".
|
HERRINGBONE
Bricks measure approx 3 1/2" X 7 1/2"
|
 |
 |
|
BASKETWEAVE
Bricks measure
approx. 3 1/2" X 7 1/2"
|
PINWHEEL
BRICK
Bricks Measure approximately approx 3 1/2" X
7 1/2
|
|

|

|
|
OLDE WORLD
STONE
Stones vary in size from approx. 3 1/2" X 5" to as large as approximately 12" X 12"
|
FACE
BRICK
Bricks measure approximately 2 1/2" X 7
3/4". This is the size brick you
typically see when looking at a brick wall.
|
 |
RIVERSTONE
The Riverstone pattern is the same basic layout as Pinwheel, but the bricks or stones are
larger. The stones in Riverstone measure approx. 5" X 10" with the square in the
middle being approximately 4 1/2" X 4 1/2".
|
|
|
PROMENADE
PortStone's Promenade pattern is made up of 4 pieces with each piece containing a quarter
circle bordered by 1 row of 4" X 4" Tiles. Each piece is approximately 33" X 33" with a full
section of Promenade (4 pieces) covering an area of approximately 5'
7" X 5'7".
Promenade makes an excellent accent piece for foyers. By bordering with 4" X 4"
PortStone tiles and in some cases Soldier Course Borders, PortStone's Promenade pattern can be made
to fit almost any foyer or entry hall. A good example of this can be seen by clicking
here. (Then click the BACK button on your browser to return to this
page.)
|
|

|
BISHOP'S HAT
The larger tiles in the Bishop's Hat pattern measure approx. 6" X 9 3/4". The
smaller corner pieces are approximately 2 3/8" X 2 3/8".
|
|

|
FLAGSTONE
The Flagstone pattern contains many stones varying in sizes ranging from as small as
approximately 3 1/2" X 5" to as large as 8 1/2" X 13 1/2" with all sizes in-between. Each
Flagstone sheet is keyed top and bottom and on both sides so that it will fit together 2
ways. The sheets are made in 6 different configurations and the stones within each sheet
were very carefully designed so that when our Flagstone pattern is properly installed it is
extremely difficult to find a pattern repeat. The diagram shown here is not intended to
depict an actual sheet of PortStone's flagstone pattern, but rather the general random appearance
of the pattern. A good example of our flagstone pattern can be seen by clicking here. (Then click the
BACK button on your browser to return to this page.)
|
 |
SOLDIER COURSE BORDER
Bricks measure approx. 4" X 8" The border is 8"
wide
|
 |
HERRINGBONE BORDER
Bricks measure approx 3 1/2" X 7 3/4" The border is 8" wide.
|
 |
FLAGSTONE BORDER
Stones are various sizes. The border is 8" wide.
|
RETURN TO TOP OF PAGE
|